Thermal Imaging Camera Johor Bahru (JB), Malaysia VALCOM TERRANOVA VALCOM T7L Float Reed level transmitters

| Cancel

ProComSol develops HART communicators for mobile device software that bridges the gap between HART Protocol devices, allowing for configuration, monitoring, calibrating, and troubleshooting of HART instruments in industrial plants.

home > Brands> VALCOM TERRANOVA> VALCOM T7L Float Reed level transmitters

VALCOM T7L Float Reed level transmitters

Product Description

T7L series includes Float Reed level transmitters. Inside the float is placed a toroidal magnet which drives, without contact, Reed contacts located inside the guide pipe. Moving along the guide pipe the float changes the reed contact status. These variations are then acquired by the electronic board and converted into a current signal.

This system enable a continuous level measurement (output 4 ~ 20 mA + HART) with high repeatability and linear level indication independently from tank shape, or allows to realize on-off controls by using two floats (output On – Off 5 ~ 15 mA).
Reed chain replacement can be done without dismantling the transmitter from the process and doesn?t need any recalibration.
As option it is possible a PT100 installation in order to get the local temperature of the fluid.

T7L series transmitters are used in marine and industry for level detection of liquids tanks.
The measurement is not affected by parameters such as conductivity, pressure, temperature, viscosity, tank shape, etc

Field of Application:Flow & Density, Level Continuous & On/Off, Other Measures, Pressure & Differential Pressure
Typology:Level Continuous
Measure Principle:Reed Switch
Measuring Range:0.6 ~10 m
Process Connection:1 1/2" G-M, 2" G – M, DN 2" Flange, DN 80 Flange
Process Temperature:Finned body: -40 Deg C ~ +130Deg C , Standard: -40 Deg C ~ +85Deg C
Accuracy Class:< 5 mm
Approvals:ATEX, CE, HART, PED, RINA, SIL, TUV
Solution:Chemical & Pharmaceutical, Food & Beverage, Marine, Water & Wastewater