Thermal Imaging Camera Johor Bahru (JB), Malaysia SPMK SPMK223 Digital Pressure Calibrator with Hart Function

| Cancel

ProComSol develops HART communicators for mobile device software that bridges the gap between HART Protocol devices, allowing for configuration, monitoring, calibrating, and troubleshooting of HART instruments in industrial plants.

home > Brands> SPMK> SPMK223 Digital Pressure Calibrator with Hart Function

SPMK223 Digital Pressure Calibrator with Hart Function

Product Description

With advanced microprocessor technology and high-tech silicon pressure sensors, the SPMK 223 pressure calibrator provides a pressure calibration solution for gauges, transmitters and pressure switches in a wide pressure range. In a highly protable package, it can measure pressure precisely with a built-in pressure sensor and read the current or mV produced by the transducer, and can even supply a drive voltage to power sensors or transmitters during calibration.

Technical Specification
1. Temperature: 0~122°F (0~ 50°C)
2.Environmental Relative humidity: ≤90%R.H
3.Atmospheric pressure: 0.86~1.01 bar ( 86~101kpa)
4.Adaptor: M20x1.5 optional
5.Power: Rechargeable lithium battery or power adapter
6.Dimension: φ120×45(mm)
7.Net Weight: 0.7kg

Pressure ranges to 36,000 psi (2,500 bar)
Accuracy of ±0.025%FS, ±0.05%FS
Built-in HART Communication, It can calibrate HART pressure transmitter
Interface of RS232,which can upload stored documents
Percentage indication of present pressure and full scale pressure
Storage of 40 files which is available when power off
Large screen with backlit
Optional 10 pressure units: Pa, kPa, MPa, mmHg, kfg/cm 2 ,cmH2O, mmH2O, psi, mbar, bar
CE approved
National explosion-proof certification approved .(Certificate#.: Exic II BT6Gc)

Voltage measurement

Range:(-30～30)V Resolution:0.1mV Accuracy:±(0.01%RD+0.005%FS)

Current measurement

Range:(-30～30)mV Resolution:0.1μA Accuracy:±(0.01%RD+0.005%FS)

Current output

Range(0～22)mV Resolution:1μA

DC24V，Maximum load capacity 50mA
On-off detection If the switch has the inspection voltage, the voltage range is（3.0~24.0）V
Note：temperature（20±5）℃，one year stability

Pneumatic

Pressure Range (-0.09～2.5)MPa
Inner Module 1 (0～2.5)MPa
Inner Module 2 (-90～250)kPa
HART
Data Storage
Pressure switch detection
mA/V measure
(0～22)mA output
Temperature compensation
External pressure module

Temperature compensation range(-10～50)℃，1year accuracy；
Inner pressure module is customizable, refer to the following (Pressure Range Select Table).

Pressure Range Select Table for Inner Pressure Module