Thermal Imaging Camera Johor Bahru (JB), Malaysia HAWK MEASUREMENT HHawk Measurement Gladiator G1 Microwave Switch

| Cancel

ProComSol develops HART communicators for mobile device software that bridges the gap between HART Protocol devices, allowing for configuration, monitoring, calibrating, and troubleshooting of HART instruments in industrial plants.

home > Brands> HAWK MEASUREMENT> HHawk Measurement Gladiator G1 Microwave Switch

HHawk Measurement Gladiator G1 Microwave Switch

Hawk Measurement Gladiator G1 Microwave Switch

Product Description

The Gladiator Gen 1 Microwave Switch can be used for blockage detection, barrier detection, machine detection and point level measurement, and detection of objects or material between two points.

Principle of Operation
A high power circular polarized Microwave pulse is emitted from the Sending unit to the Receiving unit in a transmission chain of approximately 100 pulses per second. If the path between the Sender and Receiver is blocked by any object or material which absorbs or reflects microwave energy the Receiving unit will no longer detect the complete transmission chain and indicate via Relay for automatic indication and process control requirements.

Certifications
IECEx Zone 20/21, Zone 21
Ex ta tb IIIC T* Da Db Tamb -30°C to +80°C / Tamb = -30°C to +55°C (model dependent)
IP66

State of the art circular polarisation
Simple sensitivity adjustment and calibration
IECEx ta tb IIIC T* Da Db
Theoretical range up to 300m (984ft)
Simple
1-minuteÍ setup application presets
Multiple Output & Communications Options

Primary Areas of Application Liquid Level:
Tank or Vessel

Measuring Range: 10cm (4in) - 300m (984ft)
Communications: GosHawk, Modbus, Modbus over Ethernet TCP/IP, 4-20mA
Maximum Operating Pressure: 10 Bar (145psig)
Mounting: 1" BSP, 1" NTP