clear
KELLER Series 41X Pressure Transmitter

KELLER Series 41X Pressure Transmitter

Product Description

 
Description
 
Data
 
   
 
The capacitive pressure transmitters of the 41X series are designed for measuring relative-pressure-overpressure in the mbar and µbar range. They use digital compensation with a mathematical model to achieve an accuracy of 0,1 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable analog current or voltage output.
 
The Series 41X combines the ceramic measurement cell for low pressure ranges with the µP electronics of the digital Series 30 transmitter. The pressure values from the signals of the pressure and temperature sensors are determined by polynomial compensation (see reverse). The values can be displayed and stored on a PC via an RS485 interface and programming can also be carried out.
 
The transmitters are calibrated to the base range. The CCS30 software permits programming of the analog output signal in each section of the range within the base range (e.g. range 100 mbar. Output 4…20 mA for 20…60 mbar). With the CCS30 software and the KELLER converter K-114, the calculated pressure can be displayed on a computer. The CCS30 software also allows the recording and graphic display of pressure signals. Up to 128 transmitters can be hooked together to a Bus-system.
 
This pressure transmitter is also available as an intrinsically safe version (Series 41X-Ei) and can be used as a partition wall device at the border of Zone 0 and Zone 1. Pressure transmitters in the 41X-Ei series may only be used in conjunction with proven intrinsically safe equipment.

EX II 1/2 G
Ex ia IIC T4 Ga/Gb
PTB 06 ATEX 2011 X
IECEx PTB 21.0018 X
  • Pressure Ranges 0…0,03 to 0…0,3 bar
  • Accuracy ±0,1 %FS
  • Total Error Band ±0,2 %FS @ 10…50 °C
  • Interfaces S485, 4…20 mA, 0…10 V
  • Temperature Range -20…80 °C
 
 
 
 
 
 
mail