clear
PIE 511B 10-Type RTD Calibrator

PIE 511B 10-Type RTD Calibrator

Product Description

 
Description
 
Data
 
   
 
Ten type RTD plus Ohms Simulator
The PIE Model 511B simulates RTD resistances into all types of process instruments including transmitters, recorders, controllers, alarms, data acquisition, and computer systems. No longer will you need to need to lug a decade box around or make errors reading RTD tables incorrectly. The PIE 511B is a superior replacement for decade boxes while eliminating errors caused by misreading RTD to resistance tables by allowing you to dial directly in temperature. The PIE 511B has better accuracy than many higher priced RTD calibrators.
 
 
  • Accurate to ±0.25°C (±0.5°F) for Pt 100 Ohm RTD’s with 0.1° resolution
  • Source 10 RTD curves with Direct Temperature Output or Ohms
  • Selectable °C or °F
  • Curves included for Platinum 100 and 1000 Ohm, Nickel 110 and 120 Ohm well as for Copper 10 and 50 Ohm
  • Guaranteed compatible with devices using pulsed excitation currents including PLCs, DCS, multi channel recorders, etc.
  • Works with a wide variety of smart transmitters including popular Rosemount and Honeywell models
  • EZ-Dial™ Knob with two dialing speeds makes adjusting output easy
  • EZ-Check™ switch can store settings for 0% and 100% span adjustments
  • Uses standard “AA” Alkaline Batteries
  • Superior battery life of 45 hours under typical continuous usage
  • Easy access to battery compartment
  • Lightweight and Rugged with a Solid Feel
  • Small and tough
  • Protected to 60V
  • Optional Rubber Boot, Carrying case and Test Data available
  • NIST Traceable Calibration Certificate included FREE
 
 
  • Continuously select output temperatures
    Works will all instrument ranges across the full range in degrees C & F. Not limited to 11 temperature steps!
  • Works with Pt 100 & 1000 Ohm, Cu or Ni RTDs
    One simulator replaces ALL the type and ranges for all models of the Altek 11
  • Instantly select output three temperatures
    Flip the EZ-Check switch to calibrate zero, span and mid-point
  • LCD display with backlight
    Easy viewing in dark locations
  • More resistant to accidental damage
  • Includes Certificate of Calibration
    All PIE Calibrators come with a free signed and dated certificate. Altek calibrators come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.