Thermal Imaging Camera Johor Bahru (JB), Malaysia PIE PIE 521B 14-Type Thermocouple Calibrator

| Cancel

ProComSol develops HART communicators for mobile device software that bridges the gap between HART Protocol devices, allowing for configuration, monitoring, calibrating, and troubleshooting of HART instruments in industrial plants.

home > Brands> PIE 521B 14-Type Thermocouple Calibrator

PIE 521B 14-Type Thermocouple Calibrator

Product Description

14 T/C Types Plus mV Source

The PIE 521B Thermocouple Source simulates standard thermocouple curves over the entire industrial temperature range. The PIE 521B provides precise temperatures for inputs to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. The PIE 521B has a miniature thermocouple connector on the top end for fast connections. The PIE 521B offers the highest performance and functions in its class by exceeding the accuracy and functions of many higher priced thermocouple calibrators

The low cost PIE 521B is an “easy as PIE” to use thermocouple source for checkout and calibration of all thermocouple instruments in the field, shop or control room.

Accuracy ±(0.015% of mV Setting + 0.009mV)
Calibrate in temperature for your T/C type
Adjustable temperature output in selectable 0.1°C or 0.1°F steps
Types J, K, E, T, R, S, B, N, G, C, D, L, U and mV
Typical accuracy of ±0.35°C (0.5°) for Type K
EZ-Dial™ knob easily adjust output by 0.1°C or 0.1°F
Three position EZ-Check™ switch for 0% and 100% span adjustments
Uses standard “AA” Alkaline Batteries
Superior battery life of 45 hours under typical continuous usage
Easy access to battery compartment
Lightweight and Rugged with a Solid Feel
Small and tough
Protected to 60V
Optional Rubber Boot, T/C Wire with miniature connector, and carrying case available
NIST Traceable Calibration Certificate included FREE

Continuously select output temperatures
Works will all instrument ranges across the full range in degrees C & F. Not limited to 22 temperature steps!
Works with types J, K, E, T, R, S, B, N, G, C, D, L, U, or P
One source replaces ALL the ranges for all T/C types of the Altek 22
Instantly select output three temperatures
Flip the EZ-Check™ switch to calibrate zero, span and mid-point
LCD display with backlight
Easy viewing in dark locations
More resistant to accidental damage
Reconfigure without resetting calibrator
Includes Certificate of Calibration
All PIE Calibrators come with a free signed and dated certificate. Altek calibrators come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.