Thermal Imaging Camera Johor Bahru (JB), Malaysia GOALTEK Goaltek Explosion Proof LED Torch ExMP51R

| Cancel

ProComSol develops HART communicators for mobile device software that bridges the gap between HART Protocol devices, allowing for configuration, monitoring, calibrating, and troubleshooting of HART instruments in industrial plants.

home > Brands> Goaltek Explosion Proof LED Torch ExMP51R

Goaltek Explosion Proof LED Torch ExMP51R

Explosion Proof LED Torch ExMP51R

Product Description

Intrinsic Safety Ex-Proof Torches ExMP51R (Lithium battery)

Advanced insert over-molding of glass with Nylon PA12 material

Metal Lamp Head enhances heat dissipation
Power indicator
90 ° Rotational Head
CreeLED (160lm/w, 5000 hours, 6500K)

Safety Release valve (Ensure hydrogen discharge is necessary)
Ergonomic design for strong skid resistance
Lightweight: 960g
WF2, Anti-UV, Anti-Static & Anti-corrosion
Special Environment Applicability -40 °C ≤ Ta ≤ +55 °C high and low-temperature resistance to meet each harsh and hazardous environment.
1m Impact resistant
Large button design, friendly to glove-on work.
Support for alternative signal color
work mode and Strong mode
Press for 2s for SOS mode
Built-in 6700mAh Li-ion Battery
Multi Charging modes serving various needs (USB Type-C charging, Charging base with plug, Integrated charging track rail)

Certifications: IECEx, ATEX
IECEx: Ex ib I Mb;Ex ib IIC T4 Gb; Ex ib IIIB T130 °C Db
ATEX: Ex I M2 Ex ib I Mb; Ex II 2 G D; Ex ib IIC T4 Gb; Ex ib IIIB T130°C Db
Usage: I,II Zone 1/2, and III Zone 21/22
Working ambient temp: -40 °C ≤ Ta ≤ +55 °C
Ingress protection: IP66/67
CCT:6500K
Luminous flux: ≥450lm (Strong mode), ≥160lm (work mode)
Run Time:≥11h (Strong mode), ≥17h(work mode)
Battery type: lithium battery (IEC61233, IEC 61960)
Battery capacity:3.6V, 6700mAh (4 pcs 18650 lithium batteries)
Charging way: match 1000/01-A21 charging base
Charging time:<12h
Recharging cycles:500 cycles
Lifespan:50,000h (without battery)
Indicator color: Red, Yellow, Green, White
Note: The luminous flux and continuous discharge time are the values measured under the environment of -20 °C ≤ Ta ≤ +55 °C.